Welcome to MoparFan.com! Thanks for stopping by. No matter your Mopar interest, post it up, and talk about it here. Register, start posting, and if you want the real fun stuff, get a Garage Pass. So, kick back, post up, and stay a while.

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Getrag Parts
01-24-2015, 06:07 PM
Post: #1
Getrag Parts
Clutches
good lightly used stock replacements $5 per.

Severe duty clutch packs $370 shipped

Gear Sets

Stock take outs 3.91 or 3.06 $150 shipped

New gear sets, 3.23, 3.55, 4.10, 4.30 $550 shipped

It is highly recommended that you send us your Getrag for gear installation as the correct shims and bearings are not readily available.

BFNY Performance
9515 Detroit Rd
Cleveland OH 44102
440-787-7235
Find all posts by this user
Quote this message in a reply
01-24-2015, 07:34 PM (This post was last modified: 01-24-2015 07:36 PM by BayouTiger.)
Post: #2
RE: Getrag Parts
(01-24-2015 06:07 PM)Hemi31 Wrote: Please Register or Login to view links.Clutches
good lightly used stock replacements $5 per.

Severe duty clutch packs $370 shipped

Gear Sets

Stock take outs 3.91 or 3.06 $150 shipped

New gear sets, 3.23, 3.55, 4.10, 4.30 $550 shipped

It is highly recommended that you send us your Getrag for gear installation as the correct shims and bearings are not readily available.

Crap! I didn't think there was a good option for the 3.55 and just ordered the new bolt in dif from DSS. Oh well, probably not a bad upgrade any way! I wonder what my clutches look like after almost 6 years, 5 with a blower!
Find all posts by this user
Quote this message in a reply
01-24-2015, 08:24 PM
Post: #3
RE: Getrag Parts
I think the gear set's Erik uses are made by US Gear, he will confirm one way or the other I'm sure.

Team Shake-n-Bake ftw!
Find all posts by this user
Quote this message in a reply
01-24-2015, 08:51 PM
Post: #4
RE: Getrag Parts
yes they are.

BFNY Performance
9515 Detroit Rd
Cleveland OH 44102
440-787-7235
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)